Hair can wrap around the brush head bar or on the sides of the bar. Wearing gloves, remove the debris that is caught in the brush head. You can easily see if the brush head is clogged. Flip over the vacuum head, so the bottom (the brush and wheels) is facing up.An optional step is to detach the head of the vacuum from the rest of the vacuum, so the pieces are easier to maneuver. Make sure the vacuum is turned off and unplugged.The hair can collect dust and build a wall that prevents air from flowing through the machine as it should. The big brush head can easily clog once it’s caked up with hair. The head of the vacuum is most likely the place where the clog is happening. Don’t put water in the vacuum cleaner, or it will severely damage the machine. Rinse it out with hot water and lay it out to air dry. Then, pour baking soda and vinegar into the hose and shake it again. Close both ends and gently shake the hose around so the water will knock clinging debris loose. Close one end of the hose with your hand and pour hot water on the other end. You shouldn’t have to reach too far in the vacuum to find where the debris is clogged up. The debris typically clogs near where the hose attaches to the vacuum. You will need to use your fingers to dig out debris. Clean out the vacuum where the hose attaches.Be very careful when poking something in the hose because sharp edges can cause the hose to tear. It’s recommended for the middle of the hose to use a long, slender object like a broomstick or ruler. Wearing gloves, use your finger to push or pull out debris from brush heads and the ends of the hose. The brush head can detach from the hose, and the hose can detach from the vacuum. If the hose has poor suction or is blowing out air and dirt, then you know the clog is in that specific hose. To test this, remove the attachment, plug in the vacuum, and turn it on to test the suction.

Sometimes the clog happens in the attachment hoses. Emptying the canister will make it easier to unclog your vacuum if you need to do so, and you won’t risk accidentally spilling debris everywhere. Just like dust and dirt can cover your house, it can cover all the nooks and crannies in your vacuum. Empty the Canisterĭebris is usually the culprit when the vacuum stops working. Make sure the button is in the off position and that the cord is unplugged. Once hoses are detached, accidentally turning on the vacuum will result in debris flying out of the machine and making a big mess. Unplug the Vacuumīefore you do any troubleshooting, unplugging the vacuum should be the first thing you do. Here are the steps to clean out the many hoses in the vacuum. If your vacuum is blowing out air, it’s possible that it’s clogged and is at risk of overheating. Most vacuum issues are solved by unclogging the hoses. Your model might have other buttons with similar functions that you should also check. It’s possible to hit the button accidentally, so if your model has this button, check to make sure it’s in the position that will suck in the air rather than blow it out. Some models have a setting that will change the air direction from suction to blowing. Check the Buttons on the Vacuumīefore you begin dismantling your vacuum, try pressing the various buttons first. If you can’t find your own manual, look for it on Shark’s website. It’s a good idea to try out these recommendations before trying general advice. Many manuals have sections that list the specific problems you might encounter with your vacuum and have other sections dedicated to troubleshooting. Most vacuums are similar enough that general advice will work, but some models are unique from others and will need special care. The first step when troubleshooting your vacuum cleaner is to check the manual. Let’s look at all of the steps you need to take to find why your vacuum is blowing out air. Troubleshooting is the best way to determine if your vacuum is functioning normally or if it needs to be cleaned or repaired. Cleaning out the hoses and filters is usually enough to fix it. However, sometimes your vacuum is broken or clogged if the air is blowing out. Some models blow out and suck in the air simultaneously so that it could be perfectly normal.

Your Shark vacuum is blowing out air due to a few reasons.

If you notice that your vacuum is blowing out air, there’s surely something wrong with your vacuum, right? Vacuums are supposed to suck in air and all of the dust and pollutants with it.

My shark rocket vacuum lost suction